7. Regeneratywna dychalna aparatura (REGENERATIVE RESPIRATORY EQUIPMENT)

We offer cooperation in the development and production of regenerative respiratory equipment, in particular, respirators with compressed oxygen, such as Р-30, Р-30Е, Р-34, Р-35.

Respirator P-30E

Oxygen distribution unit respirator Р-30Е (fragment of three-dimensional model)

This section describes projects in the field of regenerative respiratory equipment. See the pages on the right of this topic.

We invite to cooperate:

E-mail:

kbgarmasch@ukr.net

Contact phone numbers:

(+38096) – 074 – 06 — 49

(+38095) – 466 – 23 — 89

EDKVE4 — 220 (Ukraine)

Explosion-protected asynchronous electric motor for mining coal combines EDKVE4-220 instead of Polish SG8 335M-4A (DAMEL)

Странички «КБ «ГАРНІ МАШИНИ» («KB «HARNI MASZYNY»)

MINING MASHINE: Cutter-loader coal combine «KOBOLD»

Mining coal combine for working in thin coal seams (0,45-0,9) m with angles of incidence of the coal seam (36-90) degrees. Optimum application - (40-80) degrees.

MINING MASHINE: Cutter-loader coal combine «POISK-2(R)» («ПОИСК-2(Р)»)

Information for mining mechanical engineers in Colombia, Spain, India, Vietnam. We repair, complete with any spare parts, assembly units coal-mining combines "POISK-2", "TEMP-1". These coal combines are used for coal mining on steep and steeply-bent coal seams. For interested persons, we are ready to consider the full reproduction of these machines in Ukraine.

MINING MASHINE: Cutter-loader coal combine «TEMP-1» («ТЕМП-1»)

Cutter-loader coal combine for working on steep and steeply inclined coal seams. Information for mining mechanical engineers in Colombia, Spain, India, Vietnam. We repair, complete with any spare parts, assembly units cutter-loader coal combine «TEMP-1». This coal combine are used for coal mining on steep and steeply-bent coal seams. For interested persons, we are ready to consider the full reproduction of these machines in Ukraine.

Hopper-agitator for the energy complex for the generation of electricity on biofuel BV-28-15(30)

We offer a hopper-agitator for an energy complex for the generation of electricity from biofuels. This device can be used in a suitable cycle of processing and transportation of chemically aggressive substances, and can also be used in alternative energy complexes based on biofuels.

Pneumatic chamber pump PCP120.22P.411.122

Multi-phase pneumatic chamber pump. The main advantage of this air chamber pump is the wide range of settings and applications. Bulk material transportation can take place both in rarefied and intermittent mode, and in the mode as close as possible to the «dense phase». Productivity is up to 200 t/h, the volume of the working chamber is 1200 dm³.

Pneumatic chamber pump PCP100.92P.411.132

Pneumatic chamber pump PCP60.92P.411.132

Slurry pump SP 250-34 (ШН 250-34)

The pump is used in coal mines, processing plants in hydraulic transport lines for pumping sludge and contaminated water.

An example of the work of an extruder molding head for the production of artificial sausage casings

Special extruder BGEMH 40

Special molding head for the production of artificial protein shell of caliber 40. This device is similar to the scheme of the German engineering office of Dr. Dorstewitz.

Special extruder BGEMH40/35/34/32/30DR

Special molding head for the production of artificial protein shell of caliber 40, 35, 34, 32, 30. This device is similar to the scheme of the German engineering office of Dr. Dorstewitz.

Special extruder BGEMH 40N

Special molding head for the production of artificial protein shell of caliber 40. This device is similar to the scheme of the German engineering office of Dr. Dorstewitz.

Special extruder BGEMH 40K

Special molding head for the production of artificial protein shell of caliber 40. This device is similar to the scheme of the KMU, which is considered better than the scheme of the German engineering office of Dr. Dorstewitz.

Paleriz udarnoji diji 4×4 dm (Pile breaker cutting squre pales 4×4 dm) PBCS4x4

На цій сторінці представлено палеріз ударної дії для трощення та відкусування хвостів бетонних паль. Офіційно 4х4 дм, але обладнання може бути застосовано для паль розміром 4,5х4,5 дм.

Traversa dlja vyjmannja aerodromnyh plyt z formy TPAG14-27U (Traverse for removing airfield slabs from the mold TPAG14-27U)

Дана розробка траверси призначена для роботи з формами для виробництва аеродромних плит типу ПАГ-14 ГОСТ 25912.1-91 «Плиты железобетонные предварительно напряженные ПАГ-14 для аэродромных покрытий».

SPADOK.ORG.UA: Найдавніші історичні мапи українських земель

Це карти відомих європейських картографів, типографів, граверів, космографів, географів, істориків, мандрівників та краєзнавців. Вони є дорогоцінним матеріалом у вивченні минувшини, адже дають чималий шмат інформації, що може стати в пригоді дослідникам історико-культурної спадщини та допомогти розв'язати те чи інше питання.