RSS

Rope two-drum feed part (winch) for moving mining coal combines operating on steeply inclined and steep coal seams: 1ЛГКН



A separate feed machine (winch) is used to operate coal mining combines in conditions of steeply inclined and steep coal seams.



Rope two-drum feed part (winch) for moving mining coal combines operating on steeply inclined and steep coal seams: 1ЛГКН



This winch has 6 versions: 3 for the electric version and 3 for the pneumatic version. Accordingly, there are versions with one rope drum for technological work.



The main technical data for the electric double-drum version are given in the following table.



Names of basic parameters and sizes The main design of the winch
1ЛГКНМ2Е
1. Traction force on the last layer of winding, kN, no more 104
on the working rope, kN 92
on a safety rope, kN 12
2. Traction force on the middle layer of winding, kN 130
on the working rope, kN 115
on a safety rope, kN 15
3. The holding force on the last layer of the safety rope, kN, no more 115
4. Average rope speed, m/min:  
first 0,76
second 1,33
third 1,95
fourth (shunting) 5,9
5. Rope diameter, mm 22,5; 24; 25,5
recommended diameter, mm 24
6. Rope capacity of drums (at a rope diameter of 25,5 mm), m, not less 185
7. Installed motor power, kW 15
8. Nominal mains voltage at a frequency of 50 Hz, V 500; 600
9. Overall dimensions, mm, no more  
length 3100
width 730
height 1070
10. Weight, kg, no more 3300
11. Weight of a delivery set, kg, no more 3350

 


Photo of a winch 1LGKN on the receiving site in one of the countries of South America



Spare parts and components of this winch can be ordered from us. We can also make a new model of this machine.



E-mail: kbgarmasch@ukr.net

tel: +38-095-466-23-89

+38-096-074-06-49